• ▸The Syvecs Nissan Patrol Y62 2017+ kit brings a new level of engine management control to the Patrol Y62 range with a complete replacement Engine Control Module.
• ▸By simply plugging in the Syvecs Ecu, a whole new level of control is available while keeping the OEM electronics in the car happy.
• ▸Syvecs Features:
• ▸- Live adjustment of the engine calibrations
• ▸- VVEL Control
• ▸- Increased Line Pressure
• ▸- Faster Shifting
• ▸- Map Switching via OEM Steering buttons
• ▸- Flex Fuel control Option
• ▸- Fully functional with every other module on the Car
• ▸- Forced induction support
• ▸- Closed loop Lambda control using OEM Sensors
• ▸- Cruise Control option
• ▸- Rolling antilag / pit lane limiter strategies, great for building boost on a roll.
• ▸- Adjustable traction control strategies based on lateral G and individual wheel speed monitoring.
• ▸- Adjustable launch control with GPS and Pitch option (Requires Syvecs 100hz GPS Module)
• ▸- Limp Protection strategies
• ▸- Switchable maps with the ability to select desired engine map, boost level, traction and launch control levels through Oem Buttons
• ▸- Individual Cylinder Knock control
• ▸- Live tuning of every aspect of the engine’s calibration.
• ▸- Fully adjustable closed loop boost control with launch level adjustments and trims for turbo speed, air charge, engine coolant temp, exhaust gas temps etc..
• ▸- Built in data logging using a market leading analysis software of up to 8 hours, with data rates at up to 1000hz.
• ▸- Anti-theft and valet modes.
• ▸- Configurable engine safety trips on all important parameters like oil temperature, oil pressure.
• ▸- Fuel pump control of both main, and optional sub pumps, as well as relative fuel pressure monitoring and limiting in the event of fuel pressure dropping on boost.
• ▸- Run up to 7bar map sensors.
• ▸- Ability to fit any type of external sensor to monitor and trigger safety trips from anything from crank case pressure to damper position.
• ▸- Ability to use any size DBW throttle body e.g. Chevrolet LS7.
• ▸- Wet and Dry – Wet and dry nitrous control with ability to drive solenoids directly and control n20 heaters via pressure monitoring.
• ▸- Ability to control any external vehicle features based on sensor inputs e.g. Adjustable rear wing linked to G force or exhaust control valves.
• ▸- Connect any race series dash or even one of our Syvecs edition SDM display units.
• ▸- View any input live with built in scope up to 1000hz.
• ▸And much, much more!
• ▸See the Kit in Action below!
• ▸https://www.instagram.com/reel/Ckq0VAdscx2/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==

This kit may require additional sensors to function on your setup. We strongly recommend contacting us to discuss your project details before purchasing.

Bundle Offer: Purchase this kit with an Optimum Engine Mapping calibration service and save on costs! Contact us for a combined hardware + calibration quote.

⚠ For off-road and competition use only. Not legal for use on pollution-controlled vehicles. Not emissions compliant. Installation and use on public roads may violate federal, state, or local laws. Purchaser assumes all responsibility for compliance with applicable regulations.