Home
Home > Syvecs > Power Distribution Units

PDUX2

The PDUX2 offers advanced features such as the ability to sleep and wake via CAN bus messaging or by using hardware input pins as triggers. The PDU2X comes equipped with an impressive 16 programmable outputs in total, including 4 extremely capable multifunction outputs which can be defined by the user to operate in either discreet high-side or low-side switching, low-side PWM, Half or Full bridge operation. These flexible outputs, as well as the PDUX3 16 input channels, can be used to increase the I/O compliment of our S7, S8 and S12 products connected using our extremely fast slave link Canbus.

High power motorsport Power Distribution Unit (PDU). Combines a robust billet aluminium case and the very latest power driving technology with the highest efficiency in the industry. A total of 34 output channels with a max current capacity of 350A

  • Wiring Guide

    Software

    Outputs:

    16 main Power Outputs

    4 multifunction high side, low side, PWM, H-Bridge outputs (35A continuous, soft-start inrush limiting 35A)

    2 High Side outputs (35A continuous, hard-start inrush 60A)

    10 High Side outputs (12A continuous, hard-start inrush 17.5A)

    Output teaming to support very high current devices

    2 Additional Low Side signal PWM Outputs

    All outputs short circuit and thermally protected with multi-stage in-rush control

    Combined diagnostic output with reset input

    Up to 64 soft outputs via CAN

    Inputs:

    12 physical switch inputs or, when slaved, general purpose analogue sensor inputs including:

    4x frequency measurement inputs

    software selectable 3k ohm pull-up resistors

    4x inputs capable of programmable “wake up” functionality

    Dedicated wake pin

    Up to 64 soft inputs via CAN with configurable validation and debounce time

    Comms:

    2x 100Mbit/s full duplex Ethernet (can be used as Ethernet switch)

    3x CAN 2.0B

    RS232C serial interface

    LIN Bus

    Physical:

     6.56V to 20V input voltage (12V option)

    6V-30V input voltage (24V option)

    Dedicated logic power input

    Regulated 5V sensor supply output with short circuit protection

    1 Leavyseal connector with a total of 62 pins

    Amphenol SurLok Power Stud

    Machined Aluminium enclosure

    135x125x50mm (including connectors)

    750grams

    Operating Temperature up to +85C

PDUX3

The PDUX3 offers advanced features such as the ability to sleep and wake via CAN bus messaging or by using hardware input pins as triggers. The PDU3X comes equipped with an impressive 34 programmable outputs in total, including 10 extremely capable multifunction outputs which can be defined by the user to operate in either discreet high-side or low-side switching, low-side PWM, Half or Full bridge operation. These flexible outputs, as well as the PDUX3 16 input channels, can be used to increase the I/O compliment of our S7, S8 and S12 products connected using our extremely fast slave link Canbus.

High power motorsport Power Distribution Unit (PDU). Combines a robust billet aluminium case and the very latest power driving technology with the highest efficiency in the industry. A total of 34 output channels with a max current capacity of 350A

  • Wiring Guide

    Software

    Outputs:

     34 main Power Outputs, 20 outputs rated to 30A, 14 outputs rated to 15A

     10 multifunction high side, low side, PWM, H-Bridge, soft start outputs

    (peak current 100A)

     20 High Side outputs (peak current 125A)

     4 Additional Low Side Outputs (PWM capable)

     Output teaming to support very high current devices

     All outputs short circuit and thermally protected with multi-stage in-rush control

     Combined diagnostic output with reset input

     Up to 64 soft outputs via CAN

    Inputs:

     16 physical switch inputs or, when slaved, general purpose analogue sensor inputs including:

     8x frequency measurement inputs (4 optionally bi-polar)

     software selectable 3k ohm pull-up resistors

     4x inputs capable of programmable “wake up” functionality

     Dedicated wake pin

     Up to 64 soft inputs via CAN with configurable validation and debounce time

    Comms:

     x2 100Mbit/s full duplex Ethernet (can be used as Ethernet switch)

     x3 CAN 2.0B

     RS232C serial interface

     LIN Bus

    Physical:

     6.5V to 40V input voltage

     Dedicated 12V logic power input

     Regulated 5V sensor supply output with short circuit protection

     2 Leavyseal connectors with a total of 113 pins

     x1 Deutsch HDP 47way Connector

     Amphenol SurLok Power Stud

     Machined Aluminium enclosure

     200x130x54mm (including connectors)

     850g

     Operating Temperature -20 to +85C

PDU34A

The PDU34A offers advanced features such as the ability to sleep and wake via CAN bus messaging or by using hardware input pins as triggers. The PDU34A comes equipped with an impressive 34 programmable outputs in total, including 10 extremely capable multifunction outputs which can be defined by the user to operate in either discreet high-side or low-side switching, low-side PWM, Half or Full bridge operation. These flexible outputs, as well as the PDU34’s 16 input channels, can be used to increase the I/O compliment of our S7, S8 and S12 Ecus connected using our extremely fast slave link Canbus to drive engine control solenoids or actuators.

  • Wiring Guide

    Software

    Outputs:

     34 main Power Outputs, 30 outputs rated to 30A, 4 outputs rated to 8A

     10 multifunction high side, low side, PWM, H-Bridge, soft start outputs

    (peak current 100A)

     20 High Side outputs (peak current 125A)

     Output teaming to support very high current devices

     All outputs short circuit and thermally protected with multi-stage in-rush control

     Combined diagnostic output with reset input

     Up to 64 soft outputs via CAN

    Inputs:

     16 physical switch inputs or, when slaved, general purpose analogue sensor inputs including:

     8x frequency measurement inputs (4 optionally bi-polar)

     software selectable 3k ohm pull-up resistors

     4x inputs capable of programmable “wake up” functionality

     Dedicated wake pin

     Up to 64 soft inputs via CAN with configurable validation and debounce time

    Comms:

     x2 100Mbit/s full duplex Ethernet (can be used as Ethernet switch)

     x3 CAN 2.0B

     RS232C serial interface

     LIN Bus

    Physical:

     6.5V to 40V input voltage

     Dedicated 12V logic power input

     Regulated 5V sensor supply output with short circuit protection

     x2 Deutsch 16 way Power Connectors

     x1 Deutsch 32way Connector

     x1 M6 Power Stud

     Machined Aluminium enclosure

     995g

     Operating Temperature -20 to +85C

Syvecs products are distributed from England. The British Pound and US Dollar conversion rate changes daily. Please email us for pricing due to this fluctuation: info@oemapping.com