ECU-C01
F88GDi4 ECU
The F88GDi4 sets the benchmark for integrated direct injection engine management. Based on the F88 architecture, it drives all solenoid GDI injectors — including Ford, GM and Bosch Motorsport types — without an external driver box. Specifically designed for modern 4 cylinder GDI and CI engines.
Overview
The F88GDi4 sets the benchmark for integrated direct injection engine management. Based on the F88 architecture, it drives all solenoid GDI injectors — including Ford, GM and Bosch Motorsport types — without an external driver box. Specifically designed for modern 4 cylinder GDI and CI engines.
Capable of direct injection, port injection, or a combination of both. Standard strategies include turbocharged, supercharged, drive by wire, twin cam, twin VVT, VTEC, gearbox and differential.
PROCESSING Powerful RISC CPU for advanced strategy execution. Custom synchronous FPGA processor for engine position tracking up to 25,000rpm.
OUTPUTS 24 user configurable general purpose pulse width modulated power outputs, including: 4 ignition coil outputs IGBT or TTL (software configurable), 4 dedicated GDI injector drive outputs, 12 general PWM/port inject outputs, 2 full bridges also configurable as 4 half bridges or 4 PWMs (DbW and HDP-5 pump).
INPUTS 24 user configurable general purpose analogue sensor inputs, including 16 bipolar, inductive or hall effect speed/engine position inputs. 5 dedicated inputs including: 2 acoustic knock sensor inputs, 1 wideband (NTK) lambda sensor interface, 2 K-type thermocouple sensor interfaces.
INTERFACES 100 MHz full duplex Ethernet for calibration, configuration and data download. 3 CAN 2.0B interfaces for communication with other controllers or logging systems. RS232 serial interface.
MEMORY 64MB battery backed internal logging memory. Ultra fast data download via Ethernet. Time/date stamped data via real time clock.
POWER SUPPLY 6 to 32V input voltage range with reverse polarity protection. 2 regulated 5V sensor supply outputs with individual short circuit protection. Software configurable 5 to 12V sensor supply output. 5 separately protected sensor and communication ground inputs.
PHYSICAL 88-Way Bosch/AMP sealed connector (not included). High pressure die cast aluminium case. Maximum dimensions including connector: 178 x 122 x 36 mm. Operating temperature up to 85°C. Sealed to IP65 when mated.